-
Затир тоолинг эпоксидной смолы цвета Брауна для структуры прессформы форменной точной поверхностной
Master Models Tooling Paste Epoxy Resin Materials Packing 10kg 15kg 20kgs Product main properties This product is a two-component materials, by automatically output device fast coating model, single coating thickness can be up to 40 mm, reaction put the quantity of heat low, coating and processing ...
-
Оборудовать эпоксидной смолы наклеивает 50-55D пинк твердости 3 плотности 0.5G/Cm для мастерской модели
50-55D Density 0.5 g/cm 3 Hardness Pink Color Tooling Paste For Master Model APPLICATION: ● Master model ● Manufacturing sample ● Automotive design modeling PHYSICAL PROPERTIES Type Color Mixratio Working time Gel time Cured time LH 5300A (resin) Brown 1 20-30Min 40 Min 24 Hour LH5300B (hardener) ...
-
затир розового цвета твердости 50-60D оборудуя для мастерской модели
50-60D Hardness pink Color Tooling Paste fit to Master model APPLICATION: ● Master model ● Manufacturing sample ● Automotive design modeling PHYSICAL PROPERTIES Type Color Mixratio Working time Gel time Cured time LH 0500A (resin) Pink 1 20-30Min 40 Min 24 Hour LH0500B (hardener) White 1 CURED ...
-
65MPa затир прочности 1.1g/Cm3 оборудуя для автоматического проверяя приспособления
Tooling Paste can be processed for auto checking fixture PHYSICAL PROPERTIES Type Color Mix ratio Working time Gel time Cured time LH1000A (resin) Beige 1 40-50 Min 60Min 24 Hour LH1000B (hardener) White 1 CURED PARAMETER Type LH 1000 A/B Color Beige Density(ISO 1183) 1.0-1.1g/cm3 Cured Hardness ...
-
Затир бежевой эпоксидной смолы цвета оборудуя для автомобильного моделирования
70-75D Hardness beige Color Tooling Paste fit to Automotive design modeling APPLICATION: ● Master model ● Manufacturing sample ● Automotive design modeling Type Color Mix ratio Working time Gel time Cured time LH1000A (resin) Beige 1 30-40 Min 40 Min 24 Hour LH1000B (hardener) White 1 CURED ...
-
затир цвета Брауна твердости 70-75D оборудуя для мастерской модели
Epoxy Laminating Resin 70-75D Hardness brown Color Tooling Paste fit to Master model APPLICATION: ● Master model ● Manufacturing sample ● Automotive design modeling Type Color Mix ratio Working time Gel time Cured time LH1000A (resin) Light Brown 1 20-30 Min 40 Min 24 Hour LH1000B (hardener) White 1 ...
-
Браун моделируя затир тоолинг для делать модели/отметки уровня яхты модельный
Brown Modeling Tooling Paste Epoxy Resin Materials Packing 10kg 15kg 20kg Product operation process Given according to the proportion of fully mixing thoroughly, the same color. Try to avoid to produce bubbles, it is best to use vacuum mixer mixing. Strict control, with a thick layer of a coating is ...
-
Точность эпоксидной смолы затира тоолинг производства прессформы материальная высокая габаритная
Beige Modeling Tooling Paste Epoxy Resin Materials Packing 10kg 15kg 20kg Product introduction This product is a two-component epoxy resin imported raw materials, after mixing, apply on the surface of model, after curing on nc machining can be processed into the required model, according to ...
